| Nytro Degreaser |
|
|
|
|
-
Nytro Degreaser provides exceptional
results in all environments; commercial, industrial, automotive,
food service and any other environment where problem soils exist.
|
|
|
|
|
-
Nytro Degreaser can be used in hard,
soft, hot or cold water on all washable surfaces such as glass,
stainless steel, doors, walls, etc.
|
 |
|
Product Data |
| Solids |
15% |
| Viscosity |
25 cps |
| Toxicity |
corrosive |
| Wt/gal |
8.3 lbs |
| ph (1%) |
10.5 |
|
|
Use
at 1/2 – 8 ounces of Nytro Degreaser per gallon of water.
|
| Soiling Condition |
Dilution Ratio |
| Light Soiling |
1/2 - 2 Ounces per Gallon |
| Moderate Soiling |
2 - 4 Ounces per Gallon |
| Heavy Soiling |
4 - 8 Ounces per Gallon |
|
|
Mix Nytro Degreaser in accordance with
manufacturers recommended dilution ratio (adjust ratio in accordance
with soiling condition).
Apply Nytro Degreaser directly on
vertical surfaces using spray bottle or by submerging cleaning towel
in diluted solution (always wear rubber gloves) and wiping surface
area. Rinse the area with clean fresh water towel.
|
|
Nytro Degreaser may be applied with mop and bucket, pump-up
sprayer, or solution applicator.
Apply liberal amount of diluted solution to
desired cleaning area.
Allow to dwell for an appropriate time.
Agitate solution with rotary floor machine or
automatic scrubbing machine. Evacuate contaminated solution with
wet vacuum.
Rinse the floor thoroughly with clean water.
|
| |
|
If you would prefer to view, save
or print the details, Please click the link below. The MSDS
sheet is included with the document.
|
|
|
Back
|